Unpacking Your Fan; Parts Inventory - Ellington Craftmade MR56ESP4C1 Guia De Instalacion

1. Unpacking Your Fan.

Carefully open the packaging. Remove items
from Styrofoam inserts. Remove motor housing
and place on carpet or Styrofoam to avoid
damage to finish. Do not discard fan carton or
Styrofoam inserts should this fan need to be
returned for repairs.
Check against parts inventory that all parts have
been included.

2. Parts Inventory.

b. hanging bracket. 1 piece
c. downrod and hanging ball. 1 piece
e. weatherproof hanging ball cover. 1 piece
j. threaded washer (pre-attached to light kit
k. finial plate (pre-attached to light kit fitter).
l. finial (pre-attached to light kit fitter). 1 piece
n. switch housing plate. 1 piece
o. wire housing (pre-attached to switch housing
p. decorative nut (pre-attached to switch
IMPORTANT REMINDER: You must
use the parts provided with this fan for
proper installation and safety.
a. canopy. 1 piece
d. motor housing. 1 piece
f. yoke cover. 1 piece
g. blade arm. 4 pieces
h. blade. 4 pieces
i. light kit fitter. 1 piece
fitter). 1 piece
1 piece
m. glass shade. 1 piece
plate). 1 piece
housing plate). 4 pieces
q. hardware packs
a
d
h
i
m
q
3 x 40 watt max. candelabra base bulbs
page 2
b c
e
f
g
j
n
o
bulbs required:
(included)
l
p