Beper 90.525 Manual De Instrucciones página 9

EN
Electric Coffee Grinder Use instructions
Do not allow children to play with a coffee grinder.
Do not touch moving blades of the unit.
In order to avoid electric shock do not immerse the unit into water or
other liquids.
Provide that the cord does not touch sharp edges and hot surfaces
Do not use the unit if the power cord is damaged.
Do not repair the unit yourself. If there are some damages in the unit
apply to the authorized service center.
Do not remove the upper lid of the coffee grinder, if it is plugged.
Always switch off and unplug the unit if it is not being used or before
cleaning.
Max. time of continuous operation is not more than one grinding cycle
(about 30 seconeds) with 1-2 minutes interval.
The coffee grinder is intended for household use only.
BEFORE USAGE
Unpack the coffee grinder.
Before switching on the appliance make sure that an electricity supply corresponds to the voltage of current
specified on the housing.
Wipe the coffee cup, blades, the lid and the body with a damp cloth, and wipe dry.
DESCRIPTION Fig.1
1) Power switch
2) Transparent cover
3) Grinding bowl
4) Motor base
BEFORE THE FIRST TIME
Carefully unpack your coffee grinder and remove all packing materials. To remove any dust that may have ac-
cumulated during packaging, wipe the grinding bowl, blades with a damp lint-free cloth or sponge. Use extreme
care as the blades are sharp. The transparent cover can be immersed in water for cleaning, dry thoroughly.
Caution: Never immerse the motor base in water for cleaning and do not fill the grinding bowl with water for
cleaning.
USING YOUR COFFEE GRINDER
1. Place the coffee grinder on a flat surface.
2. Assemble the grinding bowl into the motor base, then turn the bowl clockwise until a click sound is heard.
When disassembling, turn the bowl anti-clockwise to detach it.
3. Pour coffee beans into the grinding bowl, it must be noted the quantity of coffee beans shall not exceed 60g.
4. Recover the transparent cover and plug into the power outlet.
5. Press and hold the power switch, the appliance will start operating, once release the power switch, the ap-
pliance will stop operating.
NOTE: Do not operate this appliance continuously for more than 30Second, allow appliance to cool down for 3
minute between two continuous cycles.
6. View the consistency of coffee grounds from the transparent cover.
IMPORTANT: If you want, you can remove the cover to check the consistency of the coffee grounds. It must be
noted never remove the cover until blades come to a complete stop.
7. Once the desired grind has obtained, release power switch and unplug the power cord from the outlet.
8. Remove the transparent cover, disassemble the grinding bowl and pour out the coffee ground directly.
9