EVGA Bronze B5 Serie Manual Del Usuario página 4

550W / 650W / 750W / 850W Bronze
Power Supply User Manual
Introduction: Premium Power
Introducing the EVGA B5 power supplies, the latest 80 PLUS
Certified Bronze power supplies to carry on the EVGA tradition of
reliability, performance, and affordability. The B5 power supplies
start with the most important standard for reliability – 100% Japanese
Capacitors (850W.750W) / a Japanese main capacitor (650W.550W).
Next, the B5 power supplies provide maximum flexibility by using
a small chassis and a fully modular design. The ultra-quiet 135mm
Fluid-Dynamic Bearing fan becomes silent when coupled with EVGA
ECO mode to turn off the fan in medium to low loads. Last, but not
least, the B5 power supplies have a full suite of protections and a
5-year limited warranty that you've come to know and expect from
EVGA.
Safety Information
WARNING1: This unit has no user-serviceable parts inside. Opening
the casing presents a risk of electrocution and will void the products
warranty. EVGA will not be responsible for any result of improper
use, including but not limited to, any use of the product's outside
of its intended purpose or use inconsistent with the warranty terms
available online. (Warranty information is available at
com/support/warranty and this manual is available at
com/manuals).
WARNING2:
Please use ONLY officially supported cables included
with the Power Supply, or an officially supported set of alternative
cables listed for your specific model of Power Supply made BY
EVGA. EVGA will NOT be responsible for damages caused to
your power supply, devices, or non-officially supported modular
cables in the event damage is caused by your use of non-officially
supported modular cables.
Features
STABLE POWER
The B5 series has outstanding electrical performance with
stable voltage extremely clean power
and
help you achieve the highest possible overclock (optional) and
provide the most stable and reliable power to all components.
The B5 series also has high efficiency
88% (220VAC~240VAC) efficiency
certified.
TOP QUALITY PROTECTIONS
The B5 series comes equipped with the most comprehensive
protection set possible, including Over Voltage Protection (OVP),
Under Voltage Protection (UVP), Over Power Protection (OPP),
Short Circuit Protection (SCP), Over Temperature Protection (OTP),
and Over Current Protection (OCP). This product is also covered
5-year warranty
by a and EVGA's legendary customer service
and support.
English
®
www.evga.
www.evga.
ultra
output. This can
up to 85% (115VAC) /
®
and is 80 PLUS BRONZE
Installation
1. Remove the power supply from its packaging.
2. Use the screws provided with your case to install the power supply
NOTE:
in to your computer.
supply with the fan facing down. However, if your case places the
power supply at the bottom of the case and there are no ventilation
holes available, it may be best to install the power supply with the
fan facing up for greater efficiency and reliability.
3. Connect the 20+4-pin ATX cable to the motherboard.
4. Connect the 4+4-pin EPS12V cable to the motherboard.
5. Connect the 6/6+2-pin PCI-E cables to your graphic card(s).
NOTE:
Do not attempt to plug an 8-pin PCI-E cable into a 6-pin
connector without first detaching the two extra pins.
6. Connect SATA power cables to all data drives or optical drives.
(hard drives, solid state drives, optical drives)
7. Connect the peripheral "Molex" 4-pin connectors for fans, pumps,
legacy components and other devices/adapters.
8. Connect the AC power cord to your power supply and to the wall.
Check all connections to assure a solid connection and turn the
power switch on the power supply to the ON position.
It is recommended to install the power