Harman Kardon SoundSticks II Manual De Instalación Rápida página 13

Step 5. Plug power
cord into power
adapter.
Symptom
No sound from subwoofer,
only satellites.
No sound from satellites,
only subwoofer.
High frequencies sound dull.
This product is intended to be supplied by a listed direct plug-in power unit marked "Class 2" and output rated 16V DC minimum 1.5 A.
Step 6. Plug power
adapter into subwoofer.
Possible problem
Subwoofer volume control set
at minimum.
Satellites not connected
to subwoofer.
Satellites not positioned properly.
Step 7. Plug power cord
into wall receptacle.
Solution
Rotate subwoofer volume control clockwise until relative volume level
is appropriate.
Check connection of satellites to subwoofer.
Position and tilt (angle) loudspeakers toward listener. The sound from
the satellites is very directional due to the 4-element linear array design
Step 8. Push power
ON/OFF button. Unit is
on when LED is lit.
www.harmankardon.com
Step 9. Adjust volume
level by touching + or –
button. Touching both the
+ and – buttons mutes
the audio. When muted,
touching either button
unmutes the audio.
.
13