Basic Operation - Numark HF WIRELESS Guia Del Usuario

Basic Operation

Charging
Important: Charge HF Wireless for at least 6 hours before using it for the first time or if you
haven't used it for more than a year.
To charge HF Wireless's battery, use the included USB charging cable to connect it to a
standard USB power adapter (sold separately) or a USB port on your computer (powered on).
•
When the battery is low, its red light will flash.
•
While the battery is charging, its red light will be on.
•
When the battery is done charging, the red light will turn off.
Pairing
Pairing your Bluetooth device with HF Wireless allows the two devices to communicate
wirelessly with each other. Follow a set of steps below to do this.
Standard Bluetooth Pairing
1. Power on your Bluetooth device. Make sure that it's nearby within range and that its
Bluetooth connectivity is on.
2. Make sure HF Wireless is off, and then press and hold the Function Button for 5 seconds.
The blue and red lights will flash quickly, and you'll hear a tone.
3. In the Bluetooth settings of your device, select HF Wireless. (If you are prompted to enter
a PIN, enter 0000.)
Your device is now paired to HF Wireless! You can now play audio or make a call.
HF Wireless will now "remember" your device—simply do Step 3 (with both devices
powered on) to pair them in the future. HF Wireless remembers up to 8 Bluetooth devices.
4