Naxa NPB-250A Manual De Operación página 8

Reproductor de mp3/cd con radio stereo fm y intrada de usb/sd/mmc
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

2. Press once the SKIP/SEARCH down button in music play to skip to the previous track. To skip
to a specific track at back, press this button several times.
3. Press and hold the SKIP/SEARCH up button in music play to search up at quick rate for a
specific point to play.
4. Press and hold the SKIP/SEARCH down button in music play to search down at quick rate for
a specific point to play.
5. Press +10/ALBUM button once in play to skip to the track 10 tracks ahead, twice to skip to the
track 20 tracks ahead. You can reach the last track of the disc using this button.
6. Hold the +10/ALBUM button once during MP3 playback, the album number flashes; select
the desired album using the SKIP/SEARCH buttons or the +10/ALBUM button; confirm
this album selection by holding +10/ALBUM button again, the track number "000" flickers for
your input; select the desired track of the chosen album using the SKIP/SEARCH button or
+10/ALBUM button. Finally, press PLAY/PAUSE button again to begin playing this chosen track.
REPEAT A SINGLE TRACK
To repeat a preferred track in playback, press MODE button once, the corresponding icon of
repeat a single track shows in the LCD. Then select the preferred track using SKIP/SERCH
buttons or +10/ALBUM button. The player will repeat the chosen track until you press STOP button.
REPEAT ALL TRACKS
To repeat all tracks, press MODE button twice in play mode, the corresponding icon of repeat all
tracks shows in the LCD. The player will repeat all tracks until you press STOP button.
REPEAT AN ALBUM
To repeat a preferred album in playback, press MODE button thrice, the corresponding icon of
repeat a album shows in the LCD. Then select the preferred album using +10/ALBUM button and
SKIP/SERCH buttons. The player will repeat the chosen album until you press STOP button.
INTRODUCTION PLAY
Introduction play is that the first ten seconds of each track are played in a sequential order. Press
MODE button four times to enter this mode during play, the icon of introduction play shows in the
LCD. Press SKIP/SEARCH up button in Introduction mode to begin Introduction play from the next
track immediately after the current track. Press SKIP/SEARCH down button in Introduction mode
to begin Introduction play from the current track. Press MODE button once more to exit
introduction and return to normal playback from the track the unit plays.
RANDOM PLAY
Random play is that tracks on the disc are played by the player at random. Press MODE button
five times
to enter this mode during play, the icon of random play shows in the LCD. Tracks on the
disc will be selected at random for playback and the player stops automatically after all tracks are
played. You may press STOP button to exit random play mode and press PLAY/PAUSE button to
resume normal playback.
PROGRAMMED PLAY
Programmed play is that tracks on the disc can be edited for playback in a preferred order with the
use of PROGRAM button. In MP3 stop mode, press PROGRAM button once, "PROG" shows in
the LCD with a flickering album number and the program sequence indication "P-01"; select the
album number to be programmed using SKIP/SEARCH buttons or +10/ALBUM button, and press
PROGRAM button again to store; the track number flickers waiting for your selection. Choose the
desired track with SKIP/SEARCH buttons or +10 /ALBUM button. Press PROGRAM button again
to confirm the first programming and advance to the next programming step. The program
sequence indication changes to "P-02" waiting for your next input. Repeat the steps above to
program more tracks. A maximum of 99 tracks can be programmed in memory in a preferred order.
Press PLAY/PAUSE button to begin programmed play in the preferred order after you are done
with programming. The player stops automatically after all programmed tracks are played.
You may press STOP button to terminate programmed playback. In program stop mode, press
STOP button again to clear the programming; press PLAY/PAUSE button to begin the
programmed playback with the programming order identical with the previous one done.
EN-7

Publicidad

Tabla de contenido
loading

Tabla de contenido