Error Messages - electromem GIGALITHIUM 05390 Manual De Instrucciones

INSTRUCTIONS FOR USE ISTRUZIONI PER L'USO

ERROR MESSAGES

When the "Error" LED goes on, an error code is displayed, to indicate one of the following
possible errors:
REVERSED POLARITY / SHORT-CIRCUIT / BATTERY IS DAMAGED / STARTER IS NOT
Err 1
CONNECTED
VOLTAGE IS INCORRECT (e.g. YOU ARE CONNECTED TO A 24V BATTERY)
Err 2
HIGH TEMPERATURE IN 12V INTERNAL BATTERY (Lithium LiFePO4)
Err 3
12V INTERNAL BATTERY IS FLAT (Lithium LiFePO4)
Err 4
9V ADDITIONAL BATTERY IS FLAT
Err 5
OVERLOAD IN START MODE
Err 6
OVERLOAD IN MEMORY SAVER MODE
Err 7
MAINTENANCE
Maintenance and repair jobs must be carried out by trained personnel. For such jobs, you can contact
Beta Untensili S.P.A.'s repair centre.
DISPOSAL
The crossed-out wheelie bin symbol on the equipment or packaging means that the product should be
collected separately from other types of urban waste at the end of its useful life.
Any user who is going to dispose of this tool can:
- deliver it to an appropriate collection facility for electronic or electrotechnical equipment;
- return it to the dealer upon purchase of a new, equivalent item of equipment;
- in case of a product for professional use only, contact the manufacturer which will arrange for
the product to be properly disposed of.
Proper disposal of this product allows the raw materials contained in it to be reused and prevents da-
mage to the environment or human health.
Illegal disposal of this product is a violation of the provision concerning the disposal of hazardous waste
and will give way to the application of such fines as provided for under current regulations.
WARRANTY
This tool is manufactured and tested in accordance with current EU regulations. It is covered
by a 12-month warranty for professional use or a 24-month warranty for nonprofessional use.
We will repair any breakdowns caused by material or manufacturing defects by fixing the de-
fective pieces or replacing them at our discretion.
Should assistance be required once or several times during the warranty period, the expiry date of this
warranty will remain unchanged.
This warranty will not cover defects due to wear, misuse or breakdowns caused by blows and/or falls.
In addition, this warranty will no longer be valid if any changes are made, or if the tool is damaged or
sent to the customer service in pieces, or when it is improperly used in the "FORCED START" and
"MEMORY SAVER" modes.
This warranty explicitly excludes any damage to people and/or things, whether direct or consequential.
EN I