Troubleshooting - FLETCHER FrameMaster Manual Del Usuario

CAUTION: ALWAYS disconnect air supply before performing any
service procedure.
Symptom
Air leak
Driver does not
fire, or is sluggish
Frequent jams
Other
Trouble Shooting
Probable Cause
Loose screws
Connector nipple loose
Inadequate air supply
Inadequate lubrication
Incorrect points
Loose screws on Upper
or Lower Guides
Foreign matter in
magazine
Foreign matter between
Upper and Lower Guides
Tighten screws
Tighten connector
Verify and correct
Put 1 or 2 drops of oil in
air supply connector
Use Fletcher brand
Points
Tighten screws
Open and clean
magazine
Remove Lower Guide
and clean the point
path
Contact a Fletcher-
Terry Customer Care
Representative at
800.843.3826
8
Correction
supply and pressure