Bose B2 Guía De Usuario página 4

Svenska Nederlands
B2 B M
ASS ODULE
B2 Rear Panel
Figure 5
Bass Level switch
Attaching rubber feet
Figure 6
Attaching rubber feet
4
Italiano Français
The B2 bass module includes a switch allowing you to select the appropriate level of bass
output for your application.
There are three settings:
+
=
Bass voicing designed for DJ/Music playback applications
Normal = Bass voicing ideal for bass guitar or live sound application when mic'ing
a kick drum
-
= Bass voicing which is perfect for acoustic guitar and vocal
Attention L1 Model II users: In order to take advantage of the B2 rear panel bass level
features you must upgrade your power stand firmware to version 1.4 or higher. If your power
stand firmware is not current, the rear panel switch must be in the Normal position. + or -
switch positions will not work. For the latest firmware please visit www.Bose.com/livesound.
Attention L1 model I and Classic users: When using the B2 with the L1 model I or
Classic systems the rear panel switch must be in the Normal position. + or - switch positions
will not work.
On smooth surfaces like wood floors, certain frequencies may cause the loudspeaker to
slide. For added stability and protection, detach the included self-adhesive rubber feet and
attach them to the loudspeaker in the four recesses (as shown in Figure 6). When using the
loudspeaker, keep the rubber feet in contact with the floor.
Español Deutsch
Large
feet (2)
Dansk
Small
feet (2)
English