Waring Commercial NuBlend BB185 Manual Del Usario página 6

To minimize the possibility of being scalded when blending hot
materials, the following precautions and procedures must be
observed.
1. Limit the amount of materials processed to 1/2 pint.
2. Completely remove the center portion of the two-piece
container lid before starting motor. (This will allow venting
of the rapidly heated and expanding air present inside the
container when blender is running.)
3. Always start blending at lowest speed setting, and then
progress to desired speed.
4. Never stand directly over blender when it is being started
or while it is running.
Refer to the list of Authorized Service Centers enclosed with
your Waring
®
Service Center, or write to:
Ship blenders for repair to the above address or to an
Authorized Service Center. Do not ship to a Waring Sales
Office.
Note: If your application involves the processing of biologically
active material, we request that any items returned for service
be sterilized before being shipped. Such items must be clearly
identified as having been sterilized, both by a tag on the item
itself and by a statement in the accompanying correspondence.
Waring will not accept delivery of any return unless it is so
identified.
Replacement parts for your "Out of Warranty" repairs are
obtainable at the above address.
IMPORTANT
HOT BLENDING INSTRUCTIONS
Commercial Blender for the name of the nearest
Waring Factory Service Center
P.O Box 3201
314 Ella T. Grasso Avenue
Torrington, CT 06790
(800) 492-7464
SERVICE