Mounting
- Assemble the parts delivered following the chronological order of
the drawing.
- Adjust the length of the pipes 1 in order to connect them on a
gradient between the elbow 5 and the RCI opening.
- Connect the joint 8 to the discharge.
Condensates inlet
Condensates chimney
To open, press the spring lug
Do not cover with granules
Output
Fit only if recovering condensates at the bottom of the chimney
04/12/2013 - 8541-4017-02
- Open the sachet of granules and pour them into the upper
container of the neutralisation station.
Do not pour the granules onto the filtration cylinder.
- Fill the upper container with water to cover the granules.
DU15
5