WHAT CAN HAPPEN
• Your washer operates at fluid pressures
and velocities high enough to penetrate
human and animal flesh, which could
result in amputation or other serious
injury. Leaks caused by loose fittings or
worn or damaged hoses can result in
injection injuries. DO NOT TREAT FLUID
INJECTION AS A SIMPLE CUT! See a
physician immediately!
• Relieve system pressure before at-
tempting maintenance or disassembly
of equipment.
RISK OF CHEMICAL BURN
WHAT CAN HAPPEN
• Use of acids, toxic or corrosive chemi-
cals, poisons, insecticides, or any kind
of flammable solvent with this product
could result in serious injury or death.
D25130
RISK TO FLUID INJECTION
HAZARD
HOW TO PREVENT IT
• Never place hands in front of nozzle.
• Direct spray away from self and others.
• Make sure hose and fittings are tight-
ened
and in good condition. Never
hold onto the hose or fittings during op-
eration.
• Do not allow hose to contact muffler.
• Never attach or remove wand or hose
fittings while system is pressurized.
• Use only hose and high pressure
accessories rated for pressure higher
than your pressure washer's p.s.i.
• To relieve system pressure, shut off
engine, turn off water supply, and pull
gun trigger until water stops flowing.
HAZARD
HOW TO PREVENT IT
• Do not use acids, gasoline, kerosene, or
any other flammable materials in this
product. Use only household deter-
gents, cleaners and degreasers recom-
mended for use in pressure washers.
• Wear protective clothing to protect eyes
and skin from contact with sprayed
materials.
• Do not use chlorine bleach or any other
corrosive compound.
6- ENG