Insignia IS-PD7BL Guia Del Usuario página 26

IS-PD7BL portable DVD player
2 Press direction buttons (
menu, then press
3 On the Audio Setup Page, and subsequent setup pages, use the
direction buttons (
press
4 To exit the setup page, keep pressing the direction button
until the cursor moves to the Exit icon, then press
exit the setup menu completely.
Speaker setup
The Speaker Setup Page looks like this:
Lt/Rt — For a disc recorded with a multi-channel soundtrack, the
output signal will be incorporated to left and right channel.
Stereo — For a disc recorded with a multi-channel soundtrack, the
output signal will be incorporated to stereo.
Dolby Digital setup
The Dolby Digital Setup page looks like this:
Dual mono — This is the output mode of the L and R signals of the
set audio output. If it is set to Mixed Mono, the function only works
when the DVD being played is 5.1-channel.
D.R.C. — This sets the linear compression rate to Full, 3/4, 1/2, 1/4,
or OFF.
(Play). The Audio Setup Page opens.
- - Audio S etup P age - -
S peaker S etup
Dolby Digital S etup
C hannel E qualizer
3D P roces s ing
Main P age
or
(Play) to go to that setup page or make the setting.
- - S peaker S etup P age - -
Downmix S T R
Audio S etup
- - Dolby Digital S etup - -
S T R
Dual Mono
D.R .C
Audio S etup
www.insignia-products.com
or ) to select Audio Setup
) to highlight a setup option, then
L t/R t
S teteo
S tereo
Left Mono
R ight Mono
Mixed Mono
FULL
3/4
1/2
1/4
OFF
(Play) to
25