General Safety Summary - RS Pro RSDG5000 Serie Manual Del Usario

General Safety Summary

Carefully read the following safety precautions to avoid any personal injuries
or damages to the instrument and any products connected to it. To avoid
potential hazards, please use the instrument as specified.
Only the qualified technician can service the instrument.
Avoid Fire or Personal Injury
Use Proper Power Line
Use only the special power line of the instrument which approved by local
state.
Ground the Instrument
The instrument is grounded through the protective terra conductor of the
power line. To avoid electric shock, the ground conductor must be connected
to the earth. Make sure the instrument is grounded correctly before connecting
its input or output terminals.
Connect the Signal Wire Correctly
The potential of the signal wire is equal to the earth, so do not connect the
signal wire to a high voltage. Do not touch the exposed contacts or
components.
Observe All Terminal Ratings
To avoid fire or electric shock, please observe all ratings and sign instruction
on the instrument. Before connecting the instrument, please read the manual
carefully to gain more information about the ratings.
Do not Operate with Suspected Failures
If you suspect that the product is damaged, please let a qualified service
personnel check it.
Avoid Circuit or Wire Exposure
Do not touch exposed contacts or components when the power is on.
Do not operate in wet/damp conditions.
Do not operate in an explosive atmosphere.
Keep the surface of the instrument clean and dry.
3