Remote Controller - Hobot 198 Manual Del Usuario

How to clean the glass
Step I: "Dry Clean" first
Use a clean and dry cleaning cloth to clean dust and dirt from the glass.
(1) If there is water or detergent on the cloth or glass, the water or detergent will mix together with the dust or
dirt to become mud, making cleaning results bad.
(2) Using HOBOT on sunny days or days with low humidity for best results.
(3) Don't use HOBOT on rainy or high humidity days, otherwise it will produce white streaks. The white
streaks are water molecules. This is the same thing that can happen when manually cleaning with a cloth.
Step II: Use a clean and dry cleaning cloth. Keep the cleaning cloth on the upper wheel clean and dry. Spray a little
detergent (1~2 sprays) on the lower wheel's cleaning cloth, but not too much (if too wet, the machine can't
move well), then clean the glass again.

Remote controller

The device can be remote controlled from the front and back sides.
Auto up then down
Automatically move up then down
Automatically move left then down
Automatically move right then down
Manually move UP、DOWN、RIGHT、LEFT
Stop
Clean twice
Auto left then down
17
Auto right then down