Mac Control Panel - AmpliTube StealthPlug CS Manual Del Usuario

StealthPlug CS
™

3.4 Mac Control Panel

In­ Mac­ OS­ X­ you­ can­ conveniently­ control­ your­ StealthPlug­ from­ the­
"Sound"­ System­ Preferences.­ Open the System Preferences, click on
Sound to open the sound panel and then select the StealthPlug USB
device, in the "Input" section (fig. 4).­
Now,­set­the­StealthPlug­input­sensitivity­through­the­"Input­volume­slider".­
To­ determine­your­ maximum­ "Input­level"­ you­ can­ play­ powerchords­ (e.g.­
doing­strong­down­strokes),­and­check­its­peak­meter.­Adjust­the­"Input­vol-
ume­slider"­so­the­peak­meter­is­close­to­the­right­area­(fig. 5).­
IMPORTANT: in case your audio application allows for an audio device
setting that is independent from the System setting, select the StealthPlug
from within the application "Audio and Hardware" setup.­Now select the
Fig.­4.­Setting­the­StealthPlug­as­Input­device
StealthPlug USB as the "Output" device in the Sound panel, as shown in
fig. 6.­The­StealhPlug­Volume­Up­"+"­and­down­"-"­buttons­will­control­the­
"Output­volume­slider"­as­well­the­OS­X­main­system­audio­level.
Fig.­5.­Setting­Input­Level­and­Volume
Fig.­6.­Setting­the­StealthPlug­as­Output­device
User Manual ­ ­ ­ ­ ­ ­ ­ ­ ­ 7