Kenmore 116.31040 Manual De Uso Y Cuidado página 12

I
ATTACHMENTS
I
,_ CAUTION
DO NOT use the hose when vacuum cleaner
handle is tilled back into the floor cleaning
_osltion.
_lways return the vaccum cleaner to the
upright position before using the hose and
attachments.
Failure to do so may result in overheating of
the agitator motor
and can cause
the thermal
protector to trip
TO USE ATTACHMENTS
I. Place the vacuum cleaner in the
upright position.
2. Remove the hose handle and wand by
removing hose handle from hose holder
and lifting up.
Hose
Hose
3. Use attachments as needed. See
ATTACHMENT USE TABLE.
FOR ADDITIONAL REACH
Rotate hose
release lever
down to release
hose for
maximum hose
reach.
Hose
Release
CAUTION
When using attachments, be careful not
to overextend the stretch hose when
reaching. Trying to reach beyond the
hose stretch capability could cause the
vacuum cleaner to tip over.
CAUTION
DO NOT pull the vacuum cleaner
around the room by the hose. Property
damage or personal injury could result.
TELESCOPING WAND
1. The wand length
is adjustable and
requires no ,,,,,,
"-ffir
assembly. To adjust, u
simply push down
on the wand handle _V"
and slide the upper
wand to the desired
height.
2. Extend wand to
desired length.
I
COMBINATION BRUSH
The combination brush can be attached
directly to the wand.
Brush
Brush -J L_.J
Holder
Use the brush holder without the brush for
greater suction on furniture cushions or
stairs.
Use brush holder with brush for cleaning
loose surfaces such as drapes.
12