ASSEMBLY INSTRUCTIONS
13. Glue two wood dowels (CC) into the inner holes of upper
partition panel (F) and attach it to the upper partition panel
molding (G) by engaging two cam locks (AA).
Hardware Used
AA
Cam Lock
CC
Wood Dowel
RR
Glue
14. Glue seven wood dowels (CC) into the bottom inner holes
of upper side panels (D), upper side panel moldings (E) and
upper partition panel (F) and attach them to the center shelf
(C) by engaging six cam locks (AA).
Hardware Used
AA
Cam Lock
CC
Wood Dowel
RR
Glue
15a. Glue seven wood dowels (CC) into the top inner holes of
both upper side panels (D), upper side panel moldings (E)
and the upper partition panel (F).
15b. Ask for assistance to position the top panel (A) onto the
inserted wood dowels (CC) and attach it into place by
engaging six cam locks (AA).
Hardware Used
AA
Cam Lock
CC
Wood Dowel
RR
Glue
13
G
x 2
CC
x 2
x 1
14
D
F
D
E
x 6
C
x 7
x 1
15
A
F
D
x 6
x 7
E
x 1
10
ASSEMBLY INSTRUCTIONS
16. Ask for assistance to lay down the assembled unit at its front
edges. Attach two metal brackets (HH) at the joints where the
middle crossbar (M) meets with the lower partition panels (J
and K) with four short screws (EE).
AA
Hardware Used
EE
M3.5 x 15 mm Screw
HH
Metal Bracket
F
17a. Pick up the upper back panel (R) and align the drilled holes with
E
AA
the pilot holes on the back stretcher of the top panel (A). Attach
the upper back panel (R) in place with the provided washer
head screws (DD).
17b. Align and attach two lower back panels (S) to the lower side
panels (H and I) and partition panels (J and K) with the
provided washer head screws (DD), using the pilot holes as a
CC
guide.
Hardware Used
DD
M3.5 x 15 mm Washer Head Screw
18a. Carefully stand the unit upright.
18b. Insert four shelf pins (JJ) into the desired holes inside each
side compartment. Make sure you place the four shelf pins
in the same level so that the shelf is not tilted. Tilt and rest the
adjustable shelves (Q) onto the shelf pins (JJ).
18c. Plug the cam lock covers (II) onto the visible cams locks (AA)
to conceal the cams.
CC
D
Hardware Used
II
Cam Lock Cover
AA
JJ
Shelf Pin
16
J
M
K
x 4
x 2
HH
17
DD
R
C
UP
S
x 32
I
18
II
x 26
Q
x 8
K
Q
H
11
EE
HH
H
UP
S
J
JJ
JJ