Glare Shield - Chauvet Professional COLORADO BATTEN 144 TOUR Guía De Referencia Rápida

COLORado™ Batten 144 Tour QRG

Glare Shield

Control Panel
Description
Passcode
The COLORado™ Batten 144 Tour comes with a glare shield already mounted
on the side of the product. To extend the glare shield: First, loosen the glare
shield screw; next slide the shield until it is free; then reinsert the glare shield
into either slot so it projects itself over the LEDs lens cover and retighten the
glare shield screw.
LEDs Lens Cover
Glare Shield
(folded)
Folded Position
Button
<MENU>
Exits from the current menu or function
Enables the currently displayed menu or sets the currently
<ENTER>
selected value into the selected function
Navigates upwards through the menu list and increases the
<UP>
numeric value when in a function
Navigates downwards through the menu list and decreases
<DOWN>
the numeric value when in a function
After being prompted, enter the following passcode by pressing:
<UP>, <DOWN>, <UP>, <DOWN>, <ENTER>
This passcode cannot be changed and must be used whenever prompted.
Extended Position
Function
4
Glare Shield
(extended)
LEDs Lens Cover
Glare Shield Slot
EN