Electrical; Electrical Connection; Features; Product Specifications - Power Stroke PSL1PS11 Manual Del Operador

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

EXTENSION CORDS
Use only 3-wire extension cords that have 3-prong grounding
plugs and 3-pole receptacles that accept the product's plug.
When using a paint sprayer at a considerable distance from
the power source, use an extension cord heavy enough to
carry the current that the product will draw. An undersized
extension cord will cause a drop in line voltage, resulting in
a loss of power and causing the motor to overheat. Use the
chart provided below to determine the minimum wire size
required in an extension cord. Only round jacketed cords
listed by Underwriter's Laboratories (UL) should be used.
**Ampere rating (on product data plate)
0-2.0
2.1-3.4
Cord Length
Wire Size (A.W.G.)
25'
16
16
50'
16
16
100'
16
16
**Used on 12 gauge - 20 amp circuit.
NOTE: AWG = American Wire Gauge
When working with the product outdoors, use an extension
cord that is designed for outside use. This is indicated by
the letters "W-A" or "W" on the cord's jacket.
Before using an extension cord, inspect it for loose or exposed
wires and cut or worn insulation.

PRODUCT SPECIFICATIONS

Flow Rate ............................................................ 0.24 GPM
Fluid Pressure ................................................... 0-2,800 PSI
KNOW YOUR AIRLESS PAINT SPRAYER
See Figure 1, page 16.
The safe use of this product requires an understanding of the
information on the product and in this operator's manual as
well as a knowledge of the project you are attempting. Before
use of this product, familiarize yourself with all operating
features and safety rules.
25 FT. HIGH PRESSURE HOSE
The 25 ft. high pressure hose allows the user to spray a larger
area without moving the paint sprayer.
2800 PSI PISTON PUMP
Maintains pressure as needed for different applications.

ELECTRICAL

3.5-5.0
5.1-7.0
7.1-12.0 12.1-16.0
16
16
14
16
14
14
14
12
10

FEATURES

WARNING:
Keep the extension cord clear of the working area.
Position the cord so that it will not get caught on lumber,
paint sprayer, or other obstructions while you are working
with a paint sprayer. Failure to do so can result in serious
personal injury.
WARNING:
Check extension cords before each use. If damaged
replace immediately. Never use the product with a
damaged cord since touching the damaged area could
cause electrical shock resulting in serious injury.
14

ELECTRICAL CONNECTION

12
This product is powered by a precision-built electric motor.
It should be connected to a power supply that is 120 V, AC
only (normal household current), 60 Hz. Do not operate
this product on direct current (DC). A substantial voltage
drop will cause a loss of power and the motor will overheat.
If the product does not operate when plugged into an outlet,
double check the power supply.
Input ....................................120 V, AC only, 60 Hz, 7 Amps
Weight .......................................................................19 lbs.
HOSE SWIVEL
Built-in hose swivel on the pistol-grip sprayer offers greater
flexibility while painting.
INTAKE FILTER
The intake filter keeps debris from entering the paint system.
ON-BOARD ACCESSORY STORAGE
Paint sprayer includes on-board accessory storage for
convenient access to wrenches, spray tip, and pump
protector bottle.
Page 7 — English

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Psl1s21

Tabla de contenido