Ryobi EMS-1121L Manual De Utilización página 17

GB
F D
ADDITIONAL SAFETY RULES
The following hazards may rise in connection with tool's
construction and design.
- Contact with the blade.
- Kickback of work piece and parts of work piece.
- Blade fracture
- Catapulting of blade pieces.
- Damage to hearing if effective ear defenders are not
worn.
- Harmful emissions of sawdust when the machine is
used in closed rooms. Always use supplementary dust
extraction where possible.
SPECIFICATIONS
Voltage
Power
Blade diameter
Bore diameter
No load speed
Cutting capacity
Vibration level
Weight
This tool is double insulated.
OPTIONAL LASER SYSTEM
Class
Output
Power supply
DESCRIPTION
Fig.1
1. HANDLE
2. LOWER GUARD SAFETY LOCK
3. LOWER BLADE GUARD
4. LOCK DOWN PIN
5. MITRE TABLE
6. MITRE SCALE
7. TABLE INSERT
8. BASE
9. REAR FENCE
E I P NL
230V ~ 50Hz
210mm x 2.8mm, 24T
mitre 0 °, bevel 0° - 120 x 50mm
mitre 0°, bevel 45° - 120 x 22mm
mitre 45°, bevel 0° - 85 x 50mm
mitre 45°, bevel 45° - 85 x 22mm
S DK N
English
10. MITRE LOCKS LEVER
11. DUST BAG
12. UPPER BLADE GUARD
13. SPANNER
14. HEX WRENCH
15. SLEEVE WRENCH
16. SAW BLADE
17. TRIGGER SWITCH BUTTON
18. BEVEL SCALE
19. 0º ALLEN SCREW STOPPER
20. BEVEL LOCK LEVER
21. FRONT END BLADE BOLT COVER
22. ARBOR BOLT
23. ALLEN SCREW
24. BLADE BOLT COVER SCREW
25. LASER
26. LASER ON/OFF SWITCH
1100 W
27. LASER ALIGNMENT SCREW
30mm
KNOW YOUR MITRE SAW
5000 /min
LOCK DOWN PIN (4)
Lock down pin is for easier transportation. To unlock the
head push down on the head, then pull the pin out and
raise the saw arm to the upright position (fig. 4).
≤ 5g
MITRE ADJUSTMENT
7.6 kg
This mitre saw can do mitre cut from 0° to 45°, with
automatic locking of the index stopper at 5°. Rotate mitre
lock lever (10) and move the mitre table to the desired
cutting angle and then lock the mitre table (fig.5).
2
< 1 mW
SAFETY LOCK (2)
3 V
Push the safety lock button then squeeze the trigger
switch button(17) to power on the saw. Release for power
off (fig. 6)
FENCE (9)
The fence on your mitre saw has been provided to
secure your workpiece against when making all cuts.
LOWER BLADE GUARD (3)
The lower blade guard will be retracted over the upper
blade guard (12) when the saw head is approaching to
the workpiece.
11
FIN GR H CZ RUS RO PL