Symbols In This Manual; Know Your Product; Symbols On The Product - Ryobi OES1813 Traducción De Las Instrucciones Originales

petrol-powered product. Ensure that you read and
fully understand the warnings and instructions in the
operator's manual for the product you are intending to
start. Pay particular attention to fuel safety, breathing
of exhaust fumes, and contact with moving blades or
cutters.
RISK REDUCTION
It has been reported that vibrations from hand-held tools
may contribute to a condition called Raynaud's Syndrome
in certain individuals. Symptoms may include tingling,
numbness and blanching of the fi ngers, usually apparent
upon exposure to cold. Hereditary factors, exposure to
cold and dampness, diet, smoking and work practices are
all thought to contribute to the development of the these
symptoms. There are measures that can be taken by the
operator to possibly reduce the effects of vibration:
■ Keep your body warm in cold weather. When operating
the product, wear gloves to keep the hands and wrists
warm. It is reported that cold weather is a major factor
contributing to Raynaud's Syndrome.
■ After each period of operation, exercise to increase
blood circulation.
■ Take frequent work breaks. Limit the amount of
exposure per day.
■ If you experience any of the symptoms of this condition,
immediately discontinue use and see your doctor.
WARNING
Injuries maybe caused, or aggravated by prolonged use
of a tool. When using any tool for prolonged periods,
ensure you take regular breaks.

KNOW YOUR PRODUCT

See page 125.
1. F/R button
2. Starter bit port
3. Starter bit
4. Safety interlock pin
5. Switch button
6. Battery
7. Battery latch
8. Charger

SYMBOLS ON THE PRODUCT

Read and understand all instructions
before operating the product, follow all
warnings and safety instructions.
Choose the starter bit type to match
with the shape of the icon beside the
EasyStart port on the petrol engine. Insert
the starter bit with the matching shape
facing outwards from the EasyStart
electrical wrench. Slide the F/R button to
show the same shape. Turn the exposed
bit by hand to ensure it rotates in one
direction only.
4 | English
Insert the EasyStart electrical wrench
into the port on the engine. Make sure
it is a good fi t to properly engage the
interlock pin.
Release the switch button and remove
the EasyStart electrical wrench from the
engine.
Depress the switch button for less than 4
seconds each time until the engine starts.
4
Wait a few seconds between attempts.
Waste electrical products should not
be disposed of with household waste.
Please recycle where facilities exist.
Check with your Local Authority or
retailer for recycling advice.
Conforms to all regulatory standards in
the country in the EU where the product
is purchased.
Ukrainian mark of conformity

SYMBOLS IN THIS MANUAL

Wear eye, ear, and head protection.
Wear non-slip, heavy-duty gloves.
Parts or accessories sold separately
Warning
Note
The following signal words and meanings are intended to
explain the levels of risk associated with this product:
The following signal words and meanings are intended to
explain the levels of risk associated with this product.
DANGER
Indicates an imminently hazardous situation, which, if
not avoided, will result in death or serious injury.
WARNING
Indicates a potentially hazardous situation, which, if not
avoided, could result in death or serious injury.