Step 2 Insert - Belkin F5D7000 Manual De Usuario

Installing and Setting up the Card
Step 2 Insert
Insert the Card into an Available PCI Slot on your Desktop Computer
2.1
Shut down your computer and
disconnect your power cord.
2.2
Remove the screws behind your
computer case that secure the
computer cover and remove cover.
Note: Touch any metal part of the
case to discharge static electricity to
avoid damage to the product or your
computer.
2.3
Locate an empty PCI expansion
slot. It is usually white in color.
Confirm that the Card will fit into
the slot you have chosen. Keep
in mind that the included antenna
needs to be oriented with the top
pointing up. If there are cables and
other connectors in the way, try
to pick the PCI slot that has the
fewest obstructions to the correct
positioning of the antenna.
2.4
Remove the metal port cover from
the back of the computer that
corresponds to the PCI slot you
selected. If there is a screw, place it
in a safe place, as you will be using
it to attach the Card to the computer
later.
2.5
Push the Card firmly into the PCI
slot that you have chosen. Apply
pressure as needed until the
connector is fully seated.
2.6
Now secure the Card with the screw
that you previously placed in a safe
place.
9 9
1
2
3
4
5
6