Videofied XL Manual De Uso página 6

Arming your system in Monitoring Mode
Arming your system in Partial Arming Mode
Notice: If a door contact has been left open during the arming sequence,
the panel will emit two short bips every two seconds.
The and the
indicates the Nº of the device in question.
1. From the keypad integrated in the panel
 Put your hand on the keypad for activation, the back
light turns on.
 Enter your access code and confi rm with
 After the confi rmation bip, the panel emits two
bips to validate the command and start the delay
sequence.
Notice: In case of typing error, use
2. From the badge reader
integrated in the panel
 Present the badge in front of the panel and match the
badge logo with the panel logo. Wait for the two bips
confi rming the badge has been red and the start of
the delay sequence.
From the keypad integrated in the panel
 Put your hand on the keypad for activation, the back
light turns on.
 Enter your access code and confi rm with
 After the confi rmation bip, the panel emits two
bips to validate the command and start the delay
sequence.
Notice: In case of typing error, use
blink red and the display
ENGLISH
or
2