Diagnostic Functions - Craftsman 39853 Guia De Inicio Rapido

Diagnostic Functions

Vehicle Diagnostics
Use this function to select a vehicle and then proceed to the Diagnostic Menu.
I/M Monitors
Displays a snapshot of the state of the vehicle's OBD II Monitors.
Read Codes
Reads DTCs from vehicle's computer with KOEO or KOER.
Erase Codes
Deletes DTCs from vehicle's memory.
MIL Status
Displays whether the Malfunction Indicator Lamp is on or off.
State OBD Check
Displays a basic status of the vehicle's OBD system.
View Data
Views vehicle Parameter Identification Data (PIDs) in real time. PIDs are
displayed in either a text format or graph format when available.
Record Data
Records vehicle PIDs while vehicle is parked or being driven. This function is for
diagnosing intermittent driveability problems.
View Freeze Data
Displays a snapshot of operating conditions at the time of a fault.
Drive Cycle Monitor
Displays the current state of the vehicle's OBD II Monitors in Real-Time.
O2 Monitor Tests
The O2 Monitor Tests is NOT an ON-DEMAND TEST. This Function displays
oxygen sensor monitoring test results from the vehicle's memory.
Diag Monitor Tests
Reads test results for emission related powertrain components and systems that
are and are not continuously monitored.
On-Board Systems
Scan tool controls the operation of vehicle components, tests or systems.
Vehicle Information
Scan tool displays the vehicle's VIN number, Calibration ID(s) and CVN that
identify the software version in the vehicles control module(s.) The tool also
displays In-Use Performance Tracking of important readiness monitors.
Modules Present
Views the status of all OBD II compliant modules.
Component Locator
Tool will display a list of components and their locations on the vehicle. This
function will always appear on the Main Menu. This selection will appear on the
Diagnostic Menu only when the tool has a list of component locations for the
currently selected vehicle.
Acronyms
Allows the user to view acronyms and abbreviations used by the Scan Tool.
7