Making The Electrical Connections - HAMPTON BAY Irondale 1969 Manual Del Propietário

Making the Electrical
Connections
Remember to shut off the power.
Follow the steps below to connect the fan to
your household wiring.
connecting nuts supplied with your fan.
Secure the connectors with electrical tape.
1. Connect the fan supply (black) wire and
light supply (blue) wire to the black
household supply wire. (Figure 11)
2. Connect the neutral fan (white) wire t ot he
white neutral household wire. (Figure 11)
3. Connect the fan ground wire (green) to
the household ground wire. (Figure 11)
4. After connecting the wires, spread them
apart so that the green and white wires are
on one side of the outlet box and the black
and the blue wires are on the other side.
5. Turn the connecting nuts upward and push the wiring
into the outlet box. Figures 12 and Figures 13 illustrate the
wiring connections for optional wall control (available at
your Hampton Bay Retailer, the wire color out of wall
control may vary, see wall control's installation manual for
correct wire connections)
Use the wire
NOTE
LIGHT KITS ARE AVAILABLE AT YOU HAMPTON
BAY RETAILER. THE FAN IS ALREADY WIRED TO
SUPPORT THE LIGHT KIT OPTION.
WARNING
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR
OTHER PERSONAL INJURY. MOUNT FAN ONLY ON AN
OUTLET BOX OR SUPPORTING SYSTEM MARKED
ACCEPTABLE FOR FAN SUPPORT.
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK.
DO NOT USE THIS FAN WITH ANY SOLID-STATE SPEED
CONTROL DEVICE.
SUPPLY CIRCUIT
Ground
Conductor
Outlet Box
Green
Ground
Lead
Ground to
Downrod
WHITE
BLUE
BLACK WHITE
Diagram indicates optional light kit wiring.
Figure 11
5