3Com 3CCFE575CT Guia De Inicio Rapido página 14

ENGLISH
Windows 98
1 Make sure that the CardBus PC Card is inserted and connected to the
network, as described earlier.
2 Turn the notebook on.
The New Hardware Found window briefly appears and Windows starts
building a driver information database.
When Windows 98 is ready to configure the new hardware, it opens the
Add New Hardware Wizard window.
The dialog box states that it will search for new drivers for the PCI
Ethernet Controller.
3 Click Next.
4 In the next window, select Search for best driver for your device and
click Next.
5 In the next window, select Floppy disk drives, insert the LAN Installation
Disk, and click Next.
After the Hardware Wizard finds the installation files, it displays:
"Windows found the driver for the device FE575C-3Com 10/100 LAN
CardBus-Fast Ethernet."
6 Click Next to copy the required files and build a driver information
database.
7 The Add New Hardware Wizard window states that Windows has
finished installing the driver.
If prompted, type the directory path to the Windows 98 CABS files
(typically located in the Windows\Options\CABS directory on your
notebook) or the Windows 98 installation files directory.
8 Click OK to copy the files.
Please wait while Windows checks your current network configuration.
The required time depends on your settings for network software
components.
A window appears saying that Windows has finished installing the
software that your device requires.
9 Click Finish.
The System Settings Change window states: "You must restart your
computer for the settings to take effect."
10 Remove the LAN Installation Disk and restart the notebook.
Your CardBus PC Card is installed. If you would like to confirm installation,
see "Confirming Installation" in the User Guide. If you have problems, go
to "Troubleshooting" in the User Guide.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
– 10 –