Installation Instructions; Unpacking Your Ice Maker; Connecting Your Ice Maker - Magic Chef MCIM22RT Manual Del Usuario

INSTALLATION INSTRUCTIONS

UNPACKING YOUR ICE MAKER

1. Remove all exterior and interior packaging. Check that ice basket and ice scoop is included. If any parts or
accessories are missing, please contact customer service.
2. Clean the interior with lukewarm water and a soft cloth. Remove the ice basket and wash it in warm water.
3. Find a location for your ice maker that is protected from direct sunlight and other sources of heat (i.e.:
stove, furnace, radiator). Place the ice maker on a level surface. Make sure that there is at least 5 inches of
space between the back and sides of your ice maker and the wall.
4. Allow one hour for the refrigerant fluid to settle before plugging it in the unit.
5. The appliance must be positioned so that the plug is accessible.

CONNECTING YOUR ICE MAKER

DANGER: Improper use of the grounded plug can result in the risk of electrical shock. If the power cord is
damages, please call our customer service at 888-775-0202.
1. This unit should be properly grounded for your safety. The power cord if this appliance is equipped with
a three-prong plug which connects with standard three prong wall outlets to minimize the possibility of
electric shock.
2. Plug your appliance into an exclusive, properly installed, grounded wall outlet. DO NOT under any
circumstances, cut or remove the third (ground) prong from the power cord. Any questions concerning
power and/or grounding should be directed toward a certified electrician.
3. This appliance requires a standard 115 Volt, 60 Hz electrical outlet with three prong ground.
NOTE: Before using your ice maker, it is strongly recommended to clean it thoroughly.
WARNING: The ice maker is not designed to be installed in an outside area such as a garage or a porch.
Ambient temperatures of below 50°F or above 100.4°F will hinder the performance of the appliance.
7