CARE AND MAINTENANCE
HOW TO CLEAN
1.
Remove the ice basket.
2.
Remove the drain plug from the front underside to drain the water.
3.
Clean the interior with diluted detergent, warm water and a soft cloth.
4.
The outside of the ice maker should be cleaned regularly with a mild detergent solution and warm water.
5.
Dry the interior and exterior with a soft cloth.
6.
Put back the drain plug.
7.
When the machine is not in use, open water drain cap to drain water completely from water reservoir.
CARE AND MAINTENANCE
•
The ice maker should be cleaned on a regular basis.
•
It is necessary to have an adequate ventilation space around the ice maker in order to sustain proper
performance, dissipation of heat, maintain efficiency, and low power consumption. Clearance of minimum 5
inches should be maintained at the rear and sides of the unit and 8 inches at the top of the unit.
•
To attain proper performance, be sure to plug the appliance into a properly grounded 115/60 Hz outlet.
•
DO NOT modify the power cord under any circumstances to allow the unit to be plugged into a non-
grounded outlet. To avoid heat damage to the power cord, please ensure that it does not come in proximity
or in direct contact with the compressor of the ice maker.
•
Pleas avoid installing the ice maker in a location where the appliance will come in contact with water or
moisture to minimize rusting of metal parts.
•
The ice maker should not be installed near any heat source or in a location where it will come in direct
contact with the sunlight.
9