Kathrein UFO compact plus Manual Del Usuario página 8

Installation
Slide the UFZ 896 in the slot on the left or right of the UFOcompact plus
878), whose programs are to be decrypted or encrypted.
Make sure that the UFZ 896 fully inserted and that the contact is made to the backplane
(the front plate of the UFZ 896 is located on the front of the base unit).
Fix the two thumbscrews up and down (Torx screws). The UFZ 896 is automatically rec-
ognised by the UFX 800. When the UFZ 896 reaches the proper operating condition, the
green LED lights up. Hold for encryption, decryption, the corresponding CA modules and
smart cards.
Inserting the CA module
When inserting the CA modu-
le into the UFZ 896 the top of
the CA module must always
be uppermost in the UFZ 896
(see example image right)!
If a CA module is inserted
incorrectly, damage inside
the UFZ 896 can occur!
Please also refer to the CA
module enclosed instruc-
tions.
Operation
The operation of the UFZ 896 via the graphical user interface of the control software USW
800; online help describes the confi guration of all modules, including the UFOcompact
®
plus UFZ 896. All other setting instructions, refer to the manual/online help of the USW
800.
Note: The up to date version of the USW 800 and its instructions are available free to
download on the Kathrein website "www.kathrein.de"
Waste/Recycling note
Electronic equipment is not domestic waste - it must be disposed of properly in
accordance with directive 2002/96/EC OF THE EUROPEAN PARLIAMENT AND THE
COUNCIL dated 27th January 2003 concerning used electrical and electronic appli-
ances. At the end of its service life, take this device for disposal at a designated public
collection point.
Internet: www.kathrein.de
KATHREIN-Werke KG • Anton-Kathrein-Straße 1-3 • P.O. Box 10 04 44 • 83004 ROSENHEIM • GERMANY • Phone +49 8031 184-0 • Fax +49 8031 184-306
Slot 1, 3
a d 5 and 5
936.4612/-/VKDF/0813/GB - Technical details subect to change!
®
module (eg UFO
Slot 2, 4
and 6