Cisco Linksys NAS200 Guía De Instalación Rápida página 8

N.
Enter a descriptive name for the
Network Storage System. Click
Next.
O.
If you have a router or other
DHCP server automatically
assigning IP addresses, then select
Automatically obtain an IP
address (DHCP recommended)
and click Next. (If you are not sure
which option to select, then select
this option.)
Proceed to step P.
NOTE:
To manually set the Network
Storage System's network settings,
select Set IP configuration
manually and enter the following
information:
IP Address
Storage System's IP address, and
make sure that it is on the same
local area network (LAN) segment
as the computer running the Setup
Wizard.
If you need more information, click Help.
Enter the Network
Enter Descriptive Name Enter Descriptive Name
Automatic Network Settings Automatic Network Settings
Manual Network Settings Manual Network Settings
Installation