Reset Functions - Briteq BTX BEAM 5R Manual De Instrucciones

ENGLISH OPERATION MANUAL
Display Warning
Select Display Warning, press ENTER button to confirm, current mode will blink on the display, use UP and
DOWN buttons to select No (display does not show the warning when the unit goes wrong) or Yes (display
will show the warning when unit goes wrong), press ENTER button to store. Press the MENU button to go
back to the last menu, if you leave the unit unused for one minute it will automatically exit from menu mode.
Fixture Test
Enter menu mode, select Fixture Test, press ENTER button to confirm, use UP and DOWN buttons to
select Auto Test or Manual Test
Auto Test
Select Auto Test, press ENTER button to confirm, the unit will run built-in programs to automatically test
pan, tilt, color, gobo, gobo rotation, shutter, dimmer, prism, prism rotation, frost, focus, and lamp on/off.
Press MENU button back to the last menu or exit menu mode after auto test.
Manual Test
Select Manual Test, press ENTER button to confirm, the current channel will show on the display, use Up
and DOWN buttons to select channel, press ENTER button to confirm, then use UP and DOWN buttons to
adjust the value, press ENTER button to store, the fixture will run as the channel value indicates. Press the
MENU button to go back to the last menu, if you leave the unit unused for one minute it will automatically exit
from menu mode. (All channel values will become 0 after exiting Manual Test menu)
Fixture Information
Enter menu mode, select Fixture Information, press ENTER button to confirm, use UP and DOWN buttons
to select Fixture Use Time, Lamp On Time or Firmware Version.
Fixture Use Time
Select Fixture Use Time, press ENTER button to confirm, fixture use time will show on the display, press
MENU button to exit.
Lamp On Time
Select Lamp On Time, press ENTER button to confirm, lamp on time will show on the display, press ENTER
button to confirm, use UP and DOWN buttons to select Exit or Reset Time, press ENTER button to confirm.
Press the MENU button to go back to the last menu, if you leave the unit unused for one minute it will
automatically exit from menu mode.
Firmware Version
Select Firmware Version, press ENTER button to confirm, firmware version will show on the display, press
MENU button back to exit.

Reset Functions

Enter menu mode, select Reset Function, press ENTER button to confirm, use UP and DOWN buttons to
select Pan/Tilt, Shutter/Prism, Color, Gobo, Zoom/ Focus/ Frost or All.
Pan/Tilt (Reset Pan/Tilt)
Select Pan/Tilt, press ENTER button to confirm, use UP and DOWN buttons to select Yes (the unit will run
built-in program to reset pan and tilt to their home positions) or No, press ENTER button to store. Press the
MENU button to go back to the last menu, if you leave the unit unused for one minute it will automatically exit
from menu mode.
Shutter/Prism (Reset Shutter/ Prism)
Select Shutter//Prism, press ENTER button to confirm, use UP and DOWN buttons to select Yes (the unit
will run built-in program to reset shutter and Prism to their home positions) or No, press ENTER button to
store. Press MENU button to exit.
Color (Reset Color)
Select Color, press ENTER button to confirm, use UP and DOWN buttons to select Yes (the unit will run
built-in program to reset color to their home positions) or No, press ENTER button to store. Press MENU
button to exit.
BRITEQ 11/95 BTX-BEAM 5R
®