Charging The Headset; Compatibility; Functionality - SONIXX SX1 Instrucciones De Manejo

CHARGING THE HEADSET

The headset features a built-in rechargeable battery, prior to using it for the first time
it is recommended to fully charge the battery. When the headset has low power, the
red LED flashes every 30 seconds and there is also a prompt from the headset. If this
occurs, please recharge the headset.
Connect the USB cable to a computer USB port or a USB mains adapter and insert
the charging jack into the headset. Red LED is on while charging. It takes about 2-3
hours to charge the battery fully. When charging is completed, red LED will be off.
Note: Choosing travel charger or USB cable depends on different countries or areas
and actual demands.

COMPATIBILITY

The Sonixx SX1 works best with Bluetooth devices version 2.1 or later with the
following profiles:
HSP ............................
HFP ............................
A2DP ..........................
AVRC ..........................

FUNCTIONALITY

When using with a digital media player supporting the A2DP profile
•
•
•
•
Additional features when using with a smartphone, mobile or PDA
•
•
•
•
Note: Even though the paired device and the headset support the same Bluetooth
profiles, functions may vary due to specification differences of the paired devices.
sx1ii-manual.indd 5
Headset Profile
Hands-free Profile
Advanced Audio Distribution Profile
Audio/Video Remote Control Profile
Enjoy music wirelessly
Adjust the volume
Remote control pause/play
Remote control previous/next track
Answer a call, end a call and reject a call
Redial last number
Voice dial
Call transfer between the headset and your Bluetooth device
5
15/03/2014 07:12