Maintenance; Cleaning Wand And Wedge Pads; Storage - Hoover Enhanced Clean Manual Del Propietário

5

Maintenance

It contains no user serviceable parts. Do not try to repair it yourself. Any servicing that requires disassembly
other than cleaning must be performed by a qualified appliance repair technician.
ALL servicing should be done by an authorized service representative.
CleaninG wand and
wedGe Pads
Machine washable on "warm" setting. Always
„
use a mild detergent.
For best care results, lay flat to dry.
„
6

storage

After the steamer is used, turn power off and then unplug the power cord.
„
Press down the steam trigger to release all pressure.
„
Wait 7-10 minutes until the safety pressure
„
cooled. After 10 minutes, if the safety pressure indicator has not fully dropped, release residual steam
pressure by pressing trigger and then gently pushing the safety pressure indicator. Slowly unscrew the
water fill safety cap counter-clockwise, but do not remove. Allow machine to cool an additional 5
minutes. After you have ensured the steamer has cooled and pressure has been released, the water
fill safety cap should turn freely for removal. Unscrew the cap completely (3.5).
Empty the residual water in the tank and clean the external surface with a
„
Re-install the water fill safety cap in a clockwise direction and tighten until completely sealed.
Leaving unused solution in solution tank will not affect performance.
„
Store upright in a protected, dry area. Keep water funnel and measuring cup
„
IMPORTANT
Allow the steamer to fully cool down before
performing any maintenance or troubleshooting
checks.
IMPORTANT
Never use bleach or fabric softener when
washing the microfiber cleaning pad.
indicator has gone down, which indicates the steamer has
10
dry cloth. Allow to dry.
for future use.