RugDoctor FlexClean FCM-1 Manual Del Usuario página 14

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Maintenance and Care:
REMOVING UPHOLSTERY TOOL
1
Turn The
Machine Off
Turn the machine off by
pressing the POWER
SWITCH down to the
center "OFF" position.
3
Remove The
Upholstery
Tool
Remove the
UPHOLSTERY TOOL
by squeezing on the
sides of the
connector and
pulling from the
UPHOLSTERY TOOL
PORT.
5
Empty The
Water Tanks
Empty the CLEAN WATER
TANK and DIRTY WATER
TANK as necessary. Rinse,
dry and replace on the
machine as directed in
STORAGE INSTRUCTIONS.
14
4
F L E X C L E A N
A L L - I N - O N E F L O O R C L E A N E R
®
2
Unplug
The Machine
Unplug the
POWER CORD
from the outlet
and wrap it
around the
POWER CORD
WRAP.
Attach Nozzle
Attach SOFT SURFACE OR HARD
SURFACE NOZZLE by:
3
1. Align the nozzle tabs
with the slots in the
base, just in front of the
BRUSH ROLL.
2. Rotate NOZZLE toward
machine.
1
3. Latch the NOZZLE by
pressing down on the top of the
nozzle until you hear a "click."
6
You Are Ready To
Deep Clean Or Store
The Machine.
2
|
U s e r M a n u a l

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Flexclean fcm-2

Tabla de contenido