4. Turn the knob to the steaming button. The light comes on, indicating that sterilization is in
Progress
Put the jar on the base and
then put in the basket
5. 6 minutes later. The sterilization is completed. The light is off. Turn back knob to the
position "0"
6. Turn off and unplug the appliances.
7. Take out the bottles or tableware when there is no more hot steam coming out.
WARMER/REHEATING/DEFROSTING
( On condition that under the normal room temperature 25 °,put in 30ml water, can warm
250ml milk into 37 °within 3 minutes)
1. Fill the water tank with 30ML water.
2. Put the bottle or food into the basket
3. Place the basket A into the blender jar and fit the basket D. Check that there is no magic
board
4. Turn the knob to the steaming button. The light comes on, indicating that warming is in
Progress
Upside down the bottle
F
Put the jar on the base