General Information; Use Of This Manual; Masterbus Functions - Mastervolt Digital AC 1x6A Manual De Utilización

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 18

1 GENERAL INFORMATION

1.1 Use of this manual

Copyright © 2011 Mastervolt. All rights reserved.
Reproduction, transfer, distribution or storage of part or
all of the contents in this document in any form without
the prior written permission of Mastervolt is prohibited.
This manual serves as a guideline for the safe and
effective operation of the Digital AC 1x6A.
Keep this manual at a secure place!
1.2 Guarantee specifications
Mastervolt guarantees that this product was built
according to the legally applicable standards and
stipulations. If you fail to act in accordance with the
regulations, instructions and stipulations in this user's
manual, damage can occur and/or the product will
not fulfil the specifications. This may mean that the
guarantee will become null and void.
2 OPERATION

2.1 MasterBus functions

The Digital AC 1x6A operation is entirely MasterBus
based. See www.mastervolt.com for information about
Monitoring
State
Control
Configuration
General
Language
Device name
Event locked
Configuration Timing
Min. runtime
Min. runtime
Max. runtime
Max. runtime
Event commands
Activate
MPC stop
MPC reduce
2
Description
Relay can be switched On (active) or Standby
Change the state of the relay
Set the MasterBus Digital AC menu language
Any name you wish with 12 characters max
Check box for installers to lock event configuration.
Only operable by installers.
Check box to enable the function Minimum runtime
for switching the relay.
Minimum runtime setting
Check box to enable the function Maximum runtime
for relay switching the relay.
Maximum runtime setting
The Digital AC 1x6A can be switched On (activate)
or Standby.
MPC (Maximum Power Control) prevents a power
source from being overloaded. At MPC stop the AC
1x6A disconnects the load.
At the end of MPC reduce the AC 1x6A reconnects
the load.
IMPORTANT: The standard guarantee period is two
years after date of purchase.
1.3 Liability
Mastervolt can accept no liability for:
• Consequential damage due to use of the Digital AC
1x6A;
• Possible errors in the manuals and their results;
• Use that is inconsistent with the purpose of the
product.
CAUTION!
Never remove the identification label.
MasterBus and the MasterBus event structure. The
table below shows the relay functions.
Default
Standby
Standby
English
AC Relay
Unchecked
Unchecked
15 minutes
Unchecked
480 minutes 1-65535 minutes
Range
Standby / Active
Active / Standby
See specifications
12 characters max
Unchecked / Checked
Unchecked / Checked
1-65535 minutes
Unchecked / Checked
January 2011 / Digital AC 1x6A / EN

Publicidad

Tabla de contenido
loading

Tabla de contenido