Overview; Starting Up; Basic Mode - Hornby Scalextric ‎C70 Manual De Usuario

OVERVIEW

This document is a User's Guide to help users navigate through the available features.
It consists of a 6-car digital power base unit which is connected to the track, and can
be powered by one or two Hornby standard 15V 4A DC power supply units. Two
transformer operation allows for fully independent power and control to each lane.
An optional LCD panel, which connects to the auxiliary port of the 6-car digital power
base unit, can be used to unlock many features such as driving analogue cars, four
racing games, hand-controller calibration, quick digital car programming, pacer cars
with "PrPit" timer, "free-to-pit" timer, yellow-flag effect, brake behaviours and
false start.
Many non-volatile user programmable features are available through the LCD panel
such as false start penalty time, throttle limits, throttle scales, minimum lap time,
yellow-flag delay time, pacer car "PrPit" timer.
Built-in overload and short circuit protection with single button release and resume
game play.
The 6 car power base firmware is compatible with the Microchip AN1094 bootloader.
After power-up of the 6 car power base, the bootloader waits for a few seconds for
any valid firmware update requests activity at the AUX port before running the 6 car
power base firmware.

STARTING UP

When installing C7042 please remove all other power bases.
- Plug in
t u
- Auto Start up
- On start up choose BASIC ("bASIC") or PROFESSIONAL ("Prof") mode
- Screen shows 'PULL throt trIGr to GO' (Pre Race Mode) and MODE - PR
- Pull trigger and LCD screen displays lap times
02

BASIC MODE

Set Race
- PRE RACE MODE ("PULL throt trIGr to GO")
q
rACE
i
q
t u
PR/F1/ED/PU
i
q
p
Set/Confirm
g
ENTER
20 (1-9999) change
LAP: n
q
i
p
i
p
Return to pre
race mode
ENTER
SET Place cars
PR – Practice; timed laps, GrId
on the grid
i
set number of
g
START START
laps and race for
Pause
quickest lap time
i
F1 – Grand Prix; set t u
number of laps and
race for position
LAP or +/- Time
i
ED – Endurance; set the
time of race and
until the end ENTER
PU – Pursuit; set time/laps
i
lead car has to
START
be In front of chase
cars to win Return to race
Race Summary Screen
After every Race Mode Summary screen shows race positions and statistics.
Press q to scroll
("ProG") PROGRAM
Program individual cars with
corresponding controller
q
t u
rACE/ProG
i
q
Place car on the track
i
Press Brake
ENTER
2 TRANSFORMERS RECOMMENDED
for 4 or more cars
Results screen
g
ENTER ENTER
Stop Return to pre
race mode
Press and hold q to pause
0 3