Introduction & Features; Safety Instructions; General Guidelines - HQ-Power VDL6PDB Manual Del Usuario

VDL6PDB / VDL6PDO / VDL6PDM – LIGHT EFFECT
1. Introduction & Features
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm
the environment.
Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialised
company for recycling.
This device should be returned to your distributor or to a local recycling service.
Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for having chosen the VDL6PDB / VDL6PDO / VDL6PDM light effect. Please read the manual thoroughly
before bringing this device into service.
You will see you have acquired a powerful and versatile device. It features music controlled and continuous operation
modes. Unpack the device. Please check carefully that there is no damage caused by transportation. Pay extra
attention to the state of the glass: it should be without scratches, cracks or any other mechanical deformation. Should
there be any, consult your dealer and don't install this device.
Every person involved with the installation, operation and maintenance of this device has to be qualified and carefully
follow the instructions of this manual.

2. Safety Instructions

Be very careful during the installation: touching live wires can cause life-threatening electroshocks.
Keep this device away from rain and moisture.
• This device has left the factory in perfect condition. In order to maintain this condition and to ensure a safe
operation, it is absolutely necessary for the user to follow the safety instructions and warning notes written in this
user manual.
• Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and the dealer
will not accept responsibility for any ensuing defects or problems.
• Do not switch the device on immediately after it has been exposed to changes in temperature. Protect the device
against damage by leaving it switched off until it has reached room temperature.
• Make sure that the available voltage does not exceed the voltage stated in the specifications of this manual.
• Do not crimp the power cord and protect it against damage. Have an authorised dealer replace it if necessary.
• Disconnect the device from the mains to clean it or when it is not in use. Handle the power cord by the plug only.
• Please be aware that damages caused by manual modifications to the device are not subject to warranty.

3. General Guidelines

• The fixture is only allowed to be operated with the included power adapter of 12VAC /1A. The mains input power
for the adapter must be 230VAC / 50Hz. This device is for indoor use only.
• Do not shake the device. Avoid brute force when installing or operating the device.
• Select a location where the device is protected against extreme heat, dust and moisture. Respect a minimum
distance of 0.5m between the device's light output and any illuminated surface.
• Make sure never to install the device in a place that exceeds the ambient temperature T
specifications at the end of this user manual).
• Plug the adapter in the device first. Plug the adapter into the mains afterwards.
• Operate the device only after having familiarized yourself with its functions. Do not permit operation by persons
not qualified for operating the device. Most damages are the result of unprofessional operation.
VDL6PDB / VDL6PDO / VDL6PDM_v2
Referencia Electrónica Embajadores:
ILDA008:
ILDA009:
ILDA010:
3
VDL6PDO
VDL6PDB
VDLPDM
(see technical
a
VELLEMAN