Instructions For Use - Sencor SKS 30WH Manual Del Usuario

SKS 30WH / SKS 31GR / SKS 32BL / SKS 33OR / SKS 34RD / SKS 35VT / SKS 36YL / SKS 37GG / SKS 38RS

INSTRUCTIONS FOR USE

Turning the scale on and off
Warning
Before turning on the scale for the first time, please check the back of the battery cover and
remove the insulation tape, which prevents the batteries from discharging during transport.
1) Turn the scale on by pressing the "ON/OFF TARE" button.
2) Turn the scale on by pressing the "ON/OFF TARE" button.
Warning
The scale turns itself off automatically approximately 60 seconds after displaying "0.0" on the LCD
display or while it is idle. Using the "ON/OFF TARE" button to shut off after weighing will save
the batteries.
Switching units
While weighing, you may switch between units (g -> ml -> lb.:oz. -> fl. oz.) by pressing the "UNIT"
button.
Weighing procedure
1) Turn the scale on by pressing the "ON/OFF TARE" button.
2) If necessary, select the weight unit (g -> ml -> lb.:oz. -> fl. oz.).
3) Put the food you wish to weigh onto the weighing surface.
4) The display will show the weight in the units selected.
Additional weighing function
1) Turn the scale on by pressing the "ON/OFF TARE" button.
2) If necessary, select the weight unit (g -> ml -> lb.:oz. -> fl. oz.).
3) Carefully put the food you wish to weigh onto the plate.
4) As soon as the scale stabilizes, press the "ON/OFF TARE" button. The current weight will be erased
and the display will be reset to zero.
5) Place other foods on the scale. The display will show only the weight of the newly placed foods.
6) In this way, you may continue to weigh additional foods by adding them step by step and repeating
steps 4 and 5.
How to turn off the additional weighing function (TARE)
Remove all food from the scale. The display will show a negative value. Press the "ON/OFF TARE" button
to reset the scale to zero.
Copyright © 2015, Fast ČR, a.s.
Kitchen scale
EN-5
Revision 07/2015