Página 1
King Brown Faux Leather Weight Limit: 500 Lb / 227 Kg Thank you for purchasing from DHP! DO NOT RETURN TO THE STORE ! If parts are missing or damaged, we will gladly ship your replacement parts free of charge.
Warranty Information Read Before Beginning Assembly DHP warrants this product to be free from defects in material and workmanship and ● Call our toll free number if you need assistance. agrees to remedy any such defect. This warranty covers one year from the date of ●...
Página 4
Parts Replacement Parts, Visit www.dhpfurniture.com/eng/support-home This item is packed in 2 boxes! All parts listed on this page are in Box A. If Box B is missing please contact your Retailer. Before you throw the package, please use the Check Box to identify the parts and ensure that you have all the parts needed for the assembly.
Página 5
Parts Replacement Parts, Visit www.dhpfurniture.com/eng/support-home This item is packed in 2 boxes! All parts listed on this page are in Box B. If Box A is missing please contact your Retailer. There are inner box(es) that include components required to complete this assembly. Footboard Side Panel Side Rail...
Hardware Pack Hardware Pack #: T4174049-00 1/4" X 3/4" X 52 1/4" X 1 3/16" 1/4" X 1 9/16" X 14 5/16" X 2 1/4" Please do not completely tighten all the hardware, until the entire assembly is complete, unless otherwise indicated in the step-by-step instructions.
Página 7
Step 1 Attach E to C with Repeat the same step for remaining parts E/C. The slat holes on part E should be facing upward. These two holes should be located at the bottom side. X 14...
Página 8
Step 2 Attach T and S to C with Repeat the same step for remaining parts T/S/C. X 12...
Página 9
Step 3 Screw into A and into B, leave half of the length exposed. Do not completely tighten the bolts, leave half of length exposed.
Página 10
Step 4 Hang C x 2 on A and B as illustrated, don't completely tighten the bolts until STEP 9 is complete.
Página 11
Step 5 Attach N to Z with Repeat this step for all remaining legs Z.
Página 12
Step 6 Attach N x 4 to A, B and C with X 16...
Página 13
Step 7 Attach L x 2 to F with Repeat the same procedure for remaining parts L x 2 and F.
Página 15
Step 9 Attach K to E and F with Then properly tighten all the bolts.
Página 16
Step 10 10.1 Insert P1 into X; 10.2 Press X into E, repeat the same procedure for the opposite side of the bed. Follow the same procedures going backwards for every row of slats. 10.1 10.2 SLAT WARNING Correct: Slat curve should be facing upwards .
Página 17
Step 11 11.1 Insert Y onto the ends of P1 assembled in previous step; 11.2 Take a new P1 and insert both ends into the other free end of Y, then press Y X 2 SIMULTANEOUSLY onto F X 2 as illustrated. Follow the same procedures going backwards for every row of slats.
● Move your new furniture carefully, with two people lifting and carrying the unit to its new location. ● Your DHP furniture can be disassembled and reassembled to move. ● Some parts have been pre-assembled for this item. They are illustrated on this page and available for replacement.
Garantía Gracias por su compra DHP! DHP garantiza que este producto está libre de defectos de material y de fabricación, comprometiéndose a corregirlos en caso de ser hallados. Esta garantía es valida por Registra tu producto y participa para ganar! un año a partir de la fecha de compra original.
Partes Lea antes de comenzar a ensamblar ● Llame a nuestro numero gratuito si necesita asistencia. Piezas de reemplazo, visite www.dhpfurniture.com/spa/support-home ● Trabaje en un área espaciosa y cerca de donde su producto será utilizado, preferiblemente sobre una alfombra o utilice el cartón del empaque para proteger su piso y su producto.
● Mueva sus muebles nuevos con cuidado, con dos personas levantando y Paso 2 llevando el aparato a su nueva ubicación. ● Sus muebles DHP se pueden desmontar y volver a ensamblar en caso de Una T&S con C con mudanza.
Página 22
Garantie Merci d'avoir acheté un produit de DHP ! DHP garantit que ce produit est exempt de tout vice de matériaux et de fabrication et Enregistrez votre produit et s'engage à remédier à un tel défaut. Cette garantie couvre un an à compter de la date d'achat originale.
Página 23
Avant de commencer l'assemblage Pièces ● Si vous avez besoin d'aide, appelez notre service à la clientèle sans frais. Pièces de rechange, visitez www.dhpfurniture/fre/support-home ● Travailler dans un endroit spacieux et près du lieu où l'unité sera utilisée, préférablement sur un tapis, ou sur un morceau de l'emballage pour protéger le plancher et le produit.
Répétez la même étape pour les autres C/E. personnes pour soulever et transporter le mobilier vers son nouvel emplacement. Étape 2 ● Votre mobilier DHP peut être démonté et reassemblé pour faciliter les Attacher T&S à C avec déménagements. Répétez la même étape pour les autres T/S/C.