Publicidad
Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
TM
Weight Limit: 450 Lb / 204 Kg
K.T. - 2017/12/1
© 2014 Dorel Home Products All Rights Reserved
Thank you for purchasing from DHP!
DO NOT RETURN TO THE STORE !
If parts are missing or damaged, we will gladly ship your
replacement parts free of charge.
Visit www.dhpfurniture.com/eng/support-home
or call Toll-Free 1-800-267-1739
Date of Purchase
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY
INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
4135429N
Upholstered Bed
Grey linen
Lot Number
B344135429N00 - 10125-M
Full
1
Publicidad
Manuales relacionados para DHP 4135429N
Resumen de contenidos para DHP 4135429N
- Página 1 Upholstered Bed Full Grey linen Weight Limit: 450 Lb / 204 Kg Thank you for purchasing from DHP! DO NOT RETURN TO THE STORE ! If parts are missing or damaged, we will gladly ship your replacement parts free of charge.
- Página 2 Warranty Information Read Before Beginning Assembly DHP warrants this product to be free from defects in material and workmanship and ● Call our toll free number if you need assistance. agrees to remedy any such defect. This warranty covers one year from the date of ●...
- Página 4 Parts Replacement Parts, Visit www.dhpfurniture.com/eng/support-home All in 1 big box! There are inner box(es) that include components required to complete this assembly. Headboard Footboard Side Panel Side Panel Before you throw the package, please use the T955820 T955830 T 955840 T 955850 Check Box to identify the parts and ensure that you have all the parts needed for the assembly.
- Página 5 Hardware Pack Hardware Pack #: T4135439N-01 1/4" X 3/4" X 40 1/4" X 1 3/16" X 12 1/4" X 1 9/16" X 18 Please do not completely tighten all the hardware, until the entire assembly is complete, unless otherwise indicated in the step-by-step instructions.
- Página 6 Step 1 Attach Z X 4 to A and B with Screw into A and B as illustrated. Leg tip slants towards outside! Do not completely tighten the BOLTS , leave half of the thread exposed. To avoid fraying the fabric during assembly, please lay A and B on a piece of cardboard.
- Página 7 Step 2 Attach E&F to C&D with Repeat the same step for remaining parts C/D/E/F. Slat holes towards upside! Holes shown in the circle are located on the lower side! X 16...
- Página 8 Step 3 Attach S to D and T to C with Repeat the same step for the other subassembly C & D. Pay special attention that small holes on slots of S and T should be facing upward! X 12...
- Página 9 Step 4 Hang C & D on A & B as illustrated, don't completely tighten the bolts until STEP 7 is complete.
- Página 10 Step 5 Attach L X 2 to K with...
- Página 11 Step 6 Attach sub-assembly K/L to C and D with...
- Página 12 Step 7 7.1 Attach I x 2 to A and B with 7.2 Attach I x 2 to K with , then properly tighten all the bolts.
- Página 13 Step 8 8.1 Insert P into X ; 8.2 Press X into E&F , repeat the same procedure for the opposite side. 8.3 Insert both ends of slats P into Y , then press Y into I as illustrated. Repeat the same procedures going backwards for every row of slats.
- Página 14 ● Move your new furniture carefully, with two people lifting and carrying the unit to its new location. ● Your DHP furniture can be disassembled and reassembled to move. ● Some parts have been pre-assembled for this item. They are illustrated on this page and available for replacement.
- Página 15 Garantía Gracias por su compra DHP! DHP garantiza que este producto está libre de defectos de material y de fabricación, comprometiéndose a corregirlos en caso de ser hallados. Esta garantía es valida por Registra tu producto y participa para ganar! un año a partir de la fecha de compra original.
- Página 16 Partes Lea antes de comenzar a ensamblar ● Llame a nuestro número gratuito si necesita asistencia. Piezas de reemplazo, visite www.dhpfurniture.com/spa/support-home ● Trabaje en un área espaciosa y cerca de donde su producto será utilizado, preferiblemente sobre una alfombra o utilice el cartón del empaque para proteger su piso y su producto.
- Página 17 Perno con A&B. llevando el aparato a su nueva ubicación. Paso2 ● Sus muebles DHP se pueden desmontar y volver a ensamblar en caso de Una E&F con C&D con los . Repita el paso para las otras partesC/D/E/F. mudanza.
- Página 18 Garantie Merci d'avoir acheté un produit de DHP ! DHP garantit que ce produit est exempt de tout vice de matériaux et de fabrication et Enregistrez votre produit et s'engage à remédier à un tel défaut. Cette garantie couvre un an à compter de la date d'achat originale.
- Página 19 Avant de commencer l'assemblage Pièces ● Si vous avez besoin d'aide, appelez notre service à la clientèle sans frais. Pièces de rechange, visitez www.dhpfurniture/fre/support-home ● Travailler dans un endroit spacieux et près du lieu où l'unité sera utilisée, préférablement sur un tapis, ou sur un morceau de l'emballage pour protéger le Tout dans 1 grosse boîte! plancher et le produit.
- Página 20 à A&B. personnes pour soulever et transporter le mobilier vers son nouvel emplacement. Étape 2 ● Votre mobilier DHP peut être démonté et reassemblé pour faciliter les Attacher E&F à C,D avec . Répétez la même étape pour les autres C/D/E/F.