Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Callouts
1
2
3
1.
1/4" INPUT Jacks – 1/4" hi-Z input jacks for connecting for instru-
ments or line level signals.
2.
RCA Input Jacks – Unbalanced RCA jacks for connecting line level
signals. The RCA jacks are wired in parallel with the 1/4" and
STEREO INPUT jacks.
3.
STEREO INPUT Jack – 1/8" stereo input jack for connecting line level
signals. The STEREO INPUT jack is wired in parallel with the 1/4"
and RCA jacks.
4.
-12dB Pad switch – When engaged, the input level is attenuated by
-12dB to prevent distortion when connecting high level signals.
5.
STEREO/MONO Switch – When the switch is in the STEREO position,
each input is routed to its corresponding output. In the MONO
position, the Left and Right input signals are summed together and
fed to both Left and Right Output jacks.
6.
BALANCED OUTPUT Jacks – Male XLR low-Z connectors.
7.
GROUND LIFT Switch – When the switch is engaged, the input ground
(shield) is disconnected.
1
2
4
Front
5
6
Rear
7
6
Publicidad
Tabla de contenido
