Power Source; Radio Operation; Clock Set - Bigben CD57 Manual De Instrucciones

POWER SOURCE

This Unit is designed to operate on normal 230V ~ 50Hz household power source or batteries DC : 6 x 1.5V,
UM-2, "C" size, R14. Do not attempt to operate the system using other power sources. This may result in
damage to the unit and void your warranty.
Battery power :
Be sure that the batteries are inserted correctly to avoid damage to the appliance. Always remove
the batteries when appliance will not be used for a long period of time, as this will cause leakage to
the batteries and subsequently damage to your set.
Use batteries of the same type. Never use different types of batteries together.
Do not throw the battery into the fire, or exposed to sunshine or the like.
If the liquid contained in the batteries comes in contact with eyes or skin, wash the area immediately
and carefully with clear water and consult a doctor

RADIO OPERATION

Switch on the unit, press the Power ON
•
 Tune to desired radio station by Tuning control.
 Adjust volume to desired level.
 To turn off the radio, press the Power button again
 To achieve optimum reception, adjust system position & extend fully rod antenna.

CLOCK SET

1. Press Power ON
2. Press "Clock set" for 2 seconds, LCD flashes, Press Skip up/down
24 Hour.
3. Press "Clock set" again. Hour is blinking, press "Skip up/down" to adjust the hour.
4. Press "Clock set" again, Minutes is blinking, press "Skip up/down" to adjust the minutes and "Clock Set" to
confirm
CD/ USB OPERATION
Press Power ON
•
TOC Information will display.
Remark: Please note that only the USB keys under a capacity of 16GB can be read by the unit.
PLAY/PAUSE
Press this button at stop mode, system will go to Play mode.

Press this button at play mode, system will go to Pause mode.

Press this button at pause mode, system will resume to Play mode.

STOP button
In Play or Pause mode, system changes to Stop mode

In Program Entry mode, system exit Program Entry mode.

SKIP UP button
Change the starting play track during Stop mode, cyclic to the first track if it is in the last track.

Skip to next track during Normal play, cyclic to the first track if it is at last track.

Press the key for 2 sec, Fast-Forward will execute.

Skip to next programmed track during Program play, cyclic to the first programmed track.

SKIP DOWN button
Change the starting play track during Stop mode, cyclic to the last track if it is at the first track.

Skip to previous track during Normal play, cyclic to the last track if it is at the first track.

Press the key for 2 sec, Fast-Rewind will execute.

Skip to previous programmed track during Program play, cyclic to the first programmed track.

4
.
and then
Function Selector to CD position or USB. Insert a CD disc or USB and
once.
to select the time format 12 or