Clarity C120 Manual Del Usuario página 10

MIC
FIG. 10
FIG. 11
FIG. 12
10
C120 INSTALLATION
C. Microphone Mode
Use this mode only if an RCA or headset port
connection is not available; for example, older
televisions that may not have audio outputs.
Connect the supplied microphone into the
"Mic" port on the back of the C120 base.
See Figure 10. Place the microphone near
the speaker of the television or stereo. See
Figure 11.
Note: The microphone will pick up any sound
in the room, such as speech, the doorbell, or
the telephone.
Telephone
The C120 has the ability to produce an audible
tone heard through the headset when the
telephone rings. The following step is neces-
sary if telephone ring notification is desired.
First, plug the telephone cord coming from
the wall into the "LINE" port at the rear of
the C120 base. A phone may be connected
to the C120 base by connecting a phone cord
from the C120 port labeled "PHONE" to your
telephone. See Figure 12.
The C120 allows you to use the same phone
wall outlet for both your phone and C120
TV Amplifier.