Manual Clock Setting; Auto Clock Setting; Before You Begin - Magnavox CT270MW8 A Manual Del Usario

I
NITIAL SETTING

Manual Clock Setting

You must set the clock before you can perform a timer recording. First, set
the clock manually. Then, use Auto Clock to monitor the time. Details are
on pages 12-13.
1
Press [SET-UP] to display the main menu.
2
Use [Cursor K /L] to select "SETTING CLOCK", then
press [ENTER].
or
3
Use [Cursor K /L] to select "MANUAL CLOCK SET", then
press [ENTER].
or
4
While the "MONTH" space is flashing, Use [Cursor K /L]
until the correct month appears.
Then, press [Cursor B].
or
5
Likewise, set the "DAY", "YEAR", and "HOUR".
or
12
EN
e.g.) digital TV mode
– TV/VCR SETUP –
TIMER PROGRAMMING
B SETTING CLOCK
CHANNEL SETUP
USER'S SETUP
V-CHIP SETUP
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
TIME SEARCH
INDEX SEARCH
DTV SETUP
– SETTING CLOCK –
AUTO CLOCK [ON]
AUTO CLOCK CH SEARCH
AUTO CLOCK CH [ 02]
B MANUAL CLOCK SET
D.S.T. [OFF]
– MANUAL CLOCK SET –
MONTH DAY YEAR
05 / - - - - - - - - -
HOUR MINUTE
- - : - - - -
– MANUAL CLOCK SET –
MONTH DAY YEAR
05 / 05 SAT 2007
HOUR MINUTE
05 : - - - -
6
Finally, set the "MINUTE" with [Cursor K /L], then press
[SET-UP].
or
• Although seconds are not displayed, they begin
counting from 0 when you press [SET-UP].
Use this action to synchronize the clock exactly.
Press [DISPLAY] to see the current time on the
screen. Details are on page 16.
Note:
• You may have to reset the clock after a power failure.
• To adjust the clock later, follow steps 1 to 3 on page 12.
Then use [Cursor s / B] to select the item you want to
change. Enter the correct information by pressing
[Cursor K /L]. Press [SET-UP] when you are finished.

Auto Clock Setting

The unit adjusts the clock using PBS (Public Broadcasting Station) channel.
Once you set the clock manually, the unit will monitor the correction.

Before you begin:

Make sure if the unit is connected to antenna or cable.
Set up the TV channels. Details are on page 14.
1
Press [SET-UP] to display the main menu.
2
Use [Cursor K /L] to select "SETTING CLOCK", then
press [ENTER].
or
3
Confirm "AUTO CLOCK" is "ON". If not, press [ENTER] to
select "ON".
– MANUAL CLOCK SET –
MONTH DAY YEAR
05 / 05 SAT 2007
HOUR MINUTE
05 : 40 PM
e.g.) digital TV mode
– TV/VCR SETUP –
TIMER PROGRAMMING
B SETTING CLOCK
CHANNEL SETUP
USER'S SETUP
V-CHIP SETUP
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
TIME SEARCH
INDEX SEARCH
DTV SETUP
– SETTING CLOCK –
B AUTO CLOCK [ON]
AUTO CLOCK CH SEARCH
AUTO CLOCK CH [ 02]
MANUAL CLOCK SET
D.S.T. [OFF]