Stopping The Alarm - QFX Snooze CR-33 Manual De Instrucciones

SETTING THE SECOND ALARM
NOTE: This Alarm Clock can be set for two separate Alarm times.
NOTE: Before setting the TIME make sure all of the non-clock functions (BLUETOOTH, FM,
AM) are turned OFF. If any of the non-clock functions are playing, turn the function OFF by
simply pressing & holding the FUNCTION button (1).
1. Press & hold the VOLUME UP / ALARM-2 button (5) until the time flashes on the LED
display and the ALARM-2 BUZZER Indicator Light (E) flashes. Once the time is
flashing you can release the VOLUME UP / ALARM-2 button (5).
2. Press the PREV / HOUR button (6) repeatedly until the correct HOUR is shown on the
LED display.
NOTE: The "AM" Indicator Light (A) will turn ON when the hour is set to AM.
•
For PM hours the "AM" Indicator Light (A) will turn OFF.
3. Press the NEXT / MINUTE button (7) repeatedly until the correct MINUTE is shown on
the LED display.
4. After setting the HOURS & MINUTES press the VOLUME UP / ALARM-2 button (5) to
confirm the ALARM-2 time.
5. The clock will automatically set the Alarm-2 for BUZZER and the ALARM-2 BUZZER
Indicator Light (E) will turn ON.
6. To choose to wake to RADIO simply press the VOLUME UP / ALARM-2 button (5) until
the ALARM-2 RADIO Indicator Light (F) turns ON.
7. To turn the ALARM OFF press the VOLUME UP / ALARM-2 button (5) until both the
ALARM-1 Indicator Lights (E & F) turn OFF.
SNOOZE
Once the alarm sounds you can press the SNOOZE button (4) and the alarm will temporarily
be silenced. After Nine Minutes have passed the Alarm will sound again.

STOPPING THE ALARM

To permanently stop the alarm from sounding simply press the FUNCTION button (1) and the
alarm will automatically stop.
• NOTE: The Alarm-1 and/or Alarm-2 setting will still be ON and set for the same
time for the next day.
FUNCTION
The FUNCTION button (1) will turn the non-clock functions ON & cycle through the different
function options (BLUETOOTH, FM, AM).
• To turn the non-clock functions ON, simply press the FUNCTION button (1)
repeatedly until you arrive at the desired function (BLUETOOTH, FM, AM)
• To turn the non-clock functions OFF, press & hold the FUNCTION button (1) until the
LED display shows only the current time.
VOLUME
• To Increase Volume - Press the VOLUME UP / ALARM-2 button (5)
• To Decrease Volume - Press the VOLUME DOWN / ALARM-1 button (3)
6