Basic Maintenance - IndoorCycling Group myride VI-MYVXC-01 Manual De Instrucciones

MAINTENANCE
Keep the Myride® VX console between 30% and 70% humidity. Low humidity can
cause gaskets to dry out; high humidity may cause condensation inside the unit.
Operating temperatures should not exceed 110° or dip below 40° Fahrenheit.
Spikes or dips in voltage may damage the Myride system. If your power is subject
to fluctuations, prevent damage to the Myride system with a surge protector.
The LCD and touchscreen panel is delicate. Clean only when necessary
with a soft, damp cloth. Never use liquids on the touch screen, which
can leak into the wave stand and cause electrical problems.
The wave stand itself may require occasional dusting. Do not use cleaning liquids on
the wave stand, as they can leak into the stand and damage electronics. Avoid harsh
chemicals or abrasives which may damage the coating on the surface of the stand.
To take advantage of ne w features and bug fixes, update the software on the Myride®
VX console occasionally. You can check for new software at www.indoorcycling.com
Heavy use may work some fasteners loose. As part of your regular maintenance,
please verify that all bolts and screws are secure in the Myride wave stand. Please
replace defective parts immediately and do not use the equipment until repairs
are carried out. Only use original parts from the manufacturer. To ensure the level
of safety of the Myride® VX console a regular maintenace is mandatory.
Should any unexpected problems arise, please consult the troubleshooting guide at
www.indoorcycling.com. If problems persist, contact your service representative.
1.3 BASIC
ENVIRONMENT:
CLEANING:
SOFTWARE:
HARDWARE:
TROUBLE SHOOTING:
5