Cleaning The Filters - Bissell POWERLIFTER 2482 Serie Manual De Instrucciones

Cleaning the Filters

1
Turn power OFF and remove the Dirt
Tank as directed in "Empty the Dirt
Tank" section.
3
Tap firmly against the inside of a waste
container, removing any visible dirt.
NOTE: You may rinse the Filter and Screen in warm water to clean. The Filter and Screen
need to be 100% dry before reuse. The key to maximum performance is having a clean
Filter. Cleaning the Filter after each use will help your vacuum operate at peak efficiency.
2
Grasp filter tabs and lift up to remove
the washable Filter Assembly from
the Dirt Cup. Grip the Filter and turn
counter-clockwise and lift down to
remove Filter from Filter Screen.
4
Replace Filter back into the Filter Screen
then turn clockwise to lock into place.
Attach Filter Assembly back into the Dirt
Tank and attach to Hand Vacuum until it
snaps securely in place.
www.BISSELL.com
11