Maintenance & Care; Emptying The Dirty Water Tank; Cleaning The Machine; Storing The Machine - Bissell LITTLE GREEN PRO 2505 Guia Del Usuario

Maintenance & Care

Emptying the Dirty Water Tank

1. When the Dirty Water Tank reaches the
"FULL" line on the tank it is time to empty.
2.
Remove Dirty Water Tank and carry to a
utility sink, toilet or outside (where you
will dispose of the dirty water).
3. To unlock the Dirty Water Tank lid, rotate
handle over the back of the tank. Remove
lid and pour out dirty water. Rinse out Dirty
Water Tank to remove any debris.
4.
Replace top of tank, and rotate the handle
forward to lock in place on front of tank.
5. Before replacing tank on machine, wipe
debris from red filter.

Cleaning the Machine

1. Remove and rinse the tools under clean,
running water. Allow tools to dry.
2. It is recommended that you suction clean
water from a bowl to rinse out the hose.
Then lift end of hose and stretch out to
ensure all water is cleared from hose.
3.
Wrap the Flex Hose around the Hose
Wrap and secure with latch.
Regularly Caring for the Machine
Cleaning Debris Filter
1.
Remove all hair and debris from the red
filter.
2. Place the Dirty Water Tank back onto the
machine.

Storing the Machine

Store machine in a protected dry area.
WARNING
To reduce the risk of fire, electric shock, or injury, turn
power OFF and disconnect plug from electrical outlet
before performing maintenance or troubleshooting.
2.
4.
Tip
For best results
empty, rinse and
dry tanks and tools
before storing.
Debris
Filter
NOTICE
To reduce the risk of a leaking condition, do not
store unit where freezing may occur. Damage to
internal components may result.
www.BISSELL.com
3.
5.
9